Keep Your Water Pump Working Well

6/5/2022 (Permalink)

Reduce the Chances Of Water Damage In Your Home

Dealing with water in your basement is not a pleasant undertaking. One of the best ways to reduce the chance of water damage is to keep your sump in great working condition.

1. Make Sure the Sump Pump is Plugged in Properly
It may seem like a simple task, but if the pump isn't plugged into a proper ground fault interrupter, called a GFCI, it could cause the unit to malfunction. Talk with an expert at your hardware store if you aren't sure you are using the right connection.

2. Conduct Routine Maintenance in the Unit
Set up a maintenance schedule to check your sump pump periodically. Consult the user's manual to find out how frequently pump maintenance is recommended. Key items to inspect include the following:

Ensure the pump is working well by putting a pail of water into the sump's basin. The float should cause the pump to begin draining the water.
Inspect the cord to ensure there is no damage.
Remove debris in and around the pump. Don't forget to check the intake screen and discharge pipe, as well as the pit itself.
On units with a battery-operated backup, replace the battery as recommended in the user's manual.

3. Consider Purchasing a Backup Sump Pump
If you have frequent power surges or outages in Nortonville, CA, it might be wise to purchase a backup unit. There are several kinds of pumps from which to choose. You might also consider installing an alarm on your unit to alert you if the pump stops working.
It is always a good idea to be prepared in case of an emergency. Research storm damage restoration companies ahead of time so you don't have to spend valuable time after the fact. The quicker you seek help, the faster you can repair the damage.
Keep your water pump working in optimal condition to reduce the risk of water damage in your home.