Mitigate Water Damage In 4 Steps
Steps To Address The Cause of Water Damage
Water damage can lead to serious problems at a commercial building in Concord, CA. Mitigation involves preventing damage from worsening before the affected area can be restored. Follow these four steps to address the cause of water damage and complete pipe burst cleanup.
1. Fix the Cause
Water damage will worsen until the cause is fixed. If a pipe breaks or you notice a supply line leaking, shut off the water supply and gather as much water as possible. This will limit the amount of moisture that soaks into building materials and contents.
2. Remove Standing Water
After the problem is solved, empty containers and eliminate all standing water. A building owner may want to contact a water cleanup and damage restoration service. Professionals can use a pump to get rid of every trace of water and complete pipe burst cleanup more quickly than is possible with consumer-grade equipment.
3. Clean If Necessary
A supply line burst or leak is likely to involve clean, treated Category One water. Cleaning may not be necessary if you act quickly. Category One water can degrade to Category Two if left standing for 48 hours or longer. Disinfection is necessary for damage caused by contaminated Category Two or Category Three water.
4. Dry and Restore
Once all standing water is gone, it is time to dry the affected area. Cleanup professionals may use air movers, fans, or dehumidifiers to draw water out of the air and porous surfaces. Drying will reduce the risk of mold growth after any category of water damage.
Restoration can only be completed after the affected area is completely dry. Depending on the extent of water damage, a longer drying period and additional equipment may be necessary. Pipe burst cleanup may take longer than damage caused by a supply line leaking. Rely on water cleanup professionals for the best results.